How to install your new Beko Tumble Dryer – step-by-step
Follow this step-by-step guide to fully unpacking, setting up and installing your new Beko tumble dryer.
Caution: If you have a heat pump dryer, you must wait for 12 hours before first starting it.
Remove the transportation safety packaging from your tumble dryer
Open the loading door.
You will find a nylon bag inside the drum that contains a piece of styrofoam.
Hold the nylon bag from its section marked with "XX XX".
Pull the nylon towards you to remove the transportation safety assembly.
Check that no part of the transportation safety assembly remains inside the drum.
Ensure the tumble dryer is completely level
Lean the tumble dryer back to the side to access both the front and back adjustable feet on that side. Be very careful when lifting, tilting or moving your tumble dryer, whenever possible, have someone assist you.
Turn the adjustable feet to the left or right to change their height, keep doing this until your tumble dryer stands completely level and does not move around when gently rocked.
Connect the direct drainage hose (Optional)
Pull the direct drainage hose which is located behind the tumble dryer by hand to disconnect it from where it is connected. Do not use any tools to remove the hose.
Connect one end of the separate drain hose supplied with the dryer to the connection point from where you removed the hose of the product in the previous step.
Connect the other end of the drain hose directly to the wastewater drain.
The maximum height of the drain needs to be 80 cm.
Ensure the direct drainage hose is not tangled or kinked once installed and make sure you do not step on the hose.
Check your electrical connection
Do not plug your tumble dryer into an extension socket, only ever plug your tumble dryer into a mains wall socket.
Test that the power socket is working by plugging in something you know is working, a light for example.
Once you have ensured the socket is operational you can plug your tumble dryer in.
If you have any questions regarding these steps please feel free to contact our customer service team with the model and serial number of your Tumble Dryer. They will be happy to assist to you.